The new portable motion sensor Flajzar ALF-3 is designed to detect the presence of movement and serves to protect against theft of a fishing spot, a parked car, boat, property, etc.
Thanks to the built-in sensor, the sensor detects the presence of people, the presence of movement and, using a signal, transmits information to the Flajzar RX MULTI, RX MINI, RX SIX pager or the Flajzar FISHTRON LAMP WRL1 and Flajzar FISHTRON LAMP WRL2 multifunctional luminaires.
In addition to the shock sensor, the Flajzar ALF-3 motion sensor is equipped with 2 optical infrared sensors (PIR). The device is controlled very easily and simply: with one switch located at the bottom of the motion sensor, you can turn the device on and off. The status of battery charging and sensor operation is displayed by a two-color LED. Supplied in a soft case.
The battery charge indicator is located on the case cover. The LED lights up green – this is a full charge of the battery, lights up red – the battery starts to sit down and needs to be replaced. Mounting the sensor with a bolt on a rack or rod-pod, for this the NICK 95 model from the Mecanica Vadesse brand is ideal, which has an additional central chip on the buzzbar. Motion sensor installed min. 70 cm from the surface.
The sensor should be installed 30 minutes before it is turned on in the working position. This is necessary because our device is very sensitive to temperature differences. After setting to armed mode, we have one minute to leave the protected area. The body of this model is made of high quality black plastic. Completely sealed for use in all climates.
Security sensor works with:
• Flajzar receiver RX MULTI, RX MINI, RX SIX
• Flajzar light FISHTRON LAMP WRL1
• Flajzar light FISHTRON LAMP WRL2
Charasteristics:
• New modern design
• Advanced motion sensing and calculation technology
• 2 infrared sensors
• The status of battery charging and sensor operation is displayed by a two-color LED
• Angle of coverage is 110° on both sides
• Motion detection distance up to 8 meters
• Range of signal transmission to the pager up to 800 m
• Power supply: 3V. Two LR1 batteries, 1.5 V each (included)
• Size: 75 x 50 x 27 mm
Reviews
There are no reviews yet.